Banana Kush Terp Spray
Banana Kush / THE TERPENE ALCHEMIST
Sweet Banana Meets Gassy Kush
Sweet banana taffy with a little OG attitude. Keep banana out front and add earthy Kush, pine, and fuel for a different take on your buds.
Choose your starting bottle from Terps USA terp sprays. For Banana Kush, you'll need Banana Terpene Spray and OG Kush Flavor Burst.
What Goes Into Your Banana Kush
Banana Terp Spray
Your starting bottle brings sweet banana-taffy flavor. Use the spray volume in the table below.
OG Kush Flavor Burst
Add earthy pine, citrus, and fuel with concentrated Flavor Burst. The table gives the drop count for each spray size.
Banana Kush / The starting formula
Create Your Banana Kush
5 mL Banana spray
+ 2–3 drops OG Kush Burst
- Your base: Banana Terpene Spray.
- Your accent: OG Kush Flavor Burst, the concentrated strain additive.
Looking for another accent? Browse the Flavor Burst profiles.
Use 2–3 drops of OG Kush Flavor Burst per 5 mL of Banana spray. Measure the spray base first, then add the Burst. Scale the range with your batch size as shown below.
| Banana spray base | OG Kush Burst to add |
|---|---|
| 5 mL | 2–3 drops |
| 10 mL | 4–6 drops |
| 15 mL | 6–9 drops |
Found the amount you like? Keep the exact drop count with your bottle so you can make your favorite version again.
The table prepares your Banana Kush bottle. Measure the amount you apply to flower separately.
Measure - Mix - Make It Yours
- Start with Banana Measure 5, 10, or 15 mL of Banana spray into a clean glass mixing bottle or your Spray Master cup. Leave room for the Burst.
- Bring in the Kush Add the OG Kush Burst drops from your chosen row. Keep the drop count within the range for your measured spray base.
- Mix it through Mix thoroughly. If you’re using a glass bottle, cap it securely before gently shaking.
- Put your name on it Label your blend “Banana Kush” and record the base volume and drop count. When you find your version, you’ll know how to make it again.
Mist Your Banana Kush Onto Flower
Use the Spray Master to apply your finished Banana Kush spray as a fine mist. Spread dried flower in a single layer, use light overlapping passes, and gently turn the buds for coverage.
Terps USA’s application guide uses about 2 mL per ounce of dried flower. Measure the amount you apply from the finished blend. Preparing a 5 mL recipe does not mean applying all 5 mL to one ounce. Follow the full terpene spray application and resting instructions.
Keep your test flower and application amount consistent when comparing drop counts within the recipe range. That lets you judge the change in your recipe.
Questions About Banana Kush
Is Banana Kush the same recipe as OG Banana?
No. Banana Kush uses Banana spray as the base and OG Kush Burst as the accent. OG Banana reverses those roles: OG Kush spray plus Banana Flavor Burst. The base and the type of Burst both change, so the formulas differ.
How do I choose within the drop range?
For a 5 mL Banana spray base, use 2–3 drops of OG Kush Burst. A 10 mL base takes 4–6 drops, and a 15 mL base takes 6–9 drops. Compare your preference within the range for your chosen batch size and record the amount you use.
Where Will Your Flavor Go Next
Your Banana Kush Starts Here
Get the Banana spray and OG Kush Burst, follow the amounts above, and put your own taste in charge.
Want the atomizer too? Explore complete systems →Your Weed - Your Way - Better
