One Gram Three Carts – Liquidizer Yield and Cart Math

“One Gram Three Carts” is an approximate planning example, not a guaranteed yield. To count actual fills, divide the measured usable mixture volume by the cartridge manufacturer’s specified fill amount, allowing for material left in the tools.

Worked fill-count example

Measured usable mixture Specified fill amount Full fills and remainder
2.8 mL 1.0 mL 2 full fills, with 0.8 mL remaining.
2.8 mL 0.5 mL 5 full fills, with 0.3 mL remaining.

Illustrative arithmetic only: 2.8 mL is an assumed measured amount, not a tested yield from the recipe. Use your own recovered volume and the actual hardware instructions.

Calculate cost from your actual fills

If a batch costs $24 for concentrate, Liquidizer, optional accent and the cartridges used, and produces 2.5 mL of usable oil, the batch cost is $9.60 per usable mL. These are example costs, not current product prices or guaranteed savings.

Why the three-cart example is approximate

A gram measures mass. A mL measures volume. One gram of concentrate is not automatically exactly 1 mL. The concentrate's density, the preparation process, and material left on tools can affect your measured result. Do not promise three completely filled 1 mL cartridges solely because you started with 1 gram.

Follow the specified fill procedure

Use the hardware maker’s filling guidance and leave room as instructed. A nominal cartridge size is a planning reference; its actual fill procedure still matters.

Use the hardware maker's filling guidance. Leave room as instructed and avoid treating the cartridge's visible empty space as a reason to overfill. A nominal cartridge size is a planning reference; its actual fill procedure still matters.

What belongs in the batch cost?

Include concentrate, Liquidizer, optional Flavor Burst and the cartridges used. A concentrate-only cost is not the cost of a finished cartridge. If comparing with retail carts, state their sizes and prices; the comparison does not establish a guaranteed saving.

A comparison with store-bought cartridges should state the sizes and prices used. Retail prices vary, so a specific comparison is an example rather than a guaranteed saving for every customer.

Volume and cannabinoid content are different

Adding Liquidizer increases the mixture volume; it does not add cannabinoids from the original concentrate. A larger batch should not be described as creating more THC. Any concentration estimate requires the starting material's known cannabinoid content and your measured final volume.

Does the soft-concentrate ratio use the same cart example

No. The exception uses 1 gram soft concentrate plus 1 mL Liquidizer per unit. Plan from that formula and measure the result instead of carrying over the approximate three-cart example.

What should I record

Record the starting amount, additions, measured fillable volume, cartridge capacity, and number of actual fills. These are the numbers that make your next purchase and batch easier to plan.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.